Talk to us!
Vacuum pump used to generate vacuum or move air in industrial systems
-available versions: 5.5W, 7.5W
The vacuum pumps presented are high-quality equipment, specially designed for use in industrial CNC machines. We offer two distinct models that mainly differ in suction flow rate and maximum vacuum level, allowing the ideal choice based on the specific application.
For more porous materials, such as most MDF boards, it is recommended to use the pump with higher flow rate. This is due to the ease with which these materials allow vacuum to pass through, requiring greater suction capacity to ensure secure holding. In contrast, laminated MDF, considered a non-porous material, allows the vacuum to act more efficiently, demanding a lower suction flow.
Another critical factor for efficient vacuum holding is the size of the pieces to be machined. Small pieces, such as 10x10 cm cuts, are more difficult to hold securely with vacuum due to the reduced contact area, whereas larger pieces, for example 100x100 cm, are more easily stabilized during the process.
It is important to highlight that the vacuum holding capacity decreases as the number of cuts increases, since each operation causes slight pressure losses. Additionally, the cutter diameter also influences this loss: larger cutters cause greater vacuum leakage, reducing the effectiveness of the hold.
Have questions? Talk to us and find out everything about what you're interested in. We're here to help!